NANOPROTECT STONE CARE
The Nanoprotect stone care system cleans and protects terraces, facades, driveways, sidewalks, masonry and any other type of mineral substrate. The three coordinated products can be used individually or in combination. With our green deposit remover you can disinfect the surfaces down to the pores. This is important to ensure that the protection lasts for a long time. The stone cleaner removes stubborn environmental dirt. And when everything is clean, the stone impregnation can be applied with its professional 2-phase effect.
In which order do I use the products?
- First use the green growth remover: spray on, wait 2 – 3 days and rinse with plenty of water. Under heavy loads, the automatic cleaning effect can last up to 5 days.
- Then use the stone cleaner: Spray on, leave to work for 15 – 60 minutes and remove the dirt from the surface with plenty of water and the assistance of a broom or high-pressure cleaner (at the lowest pressure level).
- When everything is clean and dry, the stone impregnation can be applied: Apply in one go until maximum saturation. The more material is absorbed into the substrate, the longer the protection lasts. But be careful: avoid puddle formation! After 2 – 4 hours the impregnation is dry and the process is complete
There is no green coating on my stones. Why should I still use the green growth remover?
- The organic residues of green deposits are often deposited deep in the pores of the subsoil. Visually they are hardly noticeable. If such residue is trapped by our stone impregnation, it can grow back from below. The preventive protection of the impregnation is then not provided. It is therefore absolutely advisable to disinfect the surface beforehand.
The green growth remover should work for 2 – 5 days. Is it allowed to rain during this time?
- That’s no problem. The surface should only remain dry 8 – 12 hours after application. The green growth remover then works on its own, even if it rains.
I used the stone cleaner and now the entire surface is brown. The brown spots cannot be removed!
- In this case there were remains of green deposits on your surface. Our stone cleaner reacts with these organic residues and turns them brown. However, these stains can be removed without leaving any residue by subsequently using the green stain remover.
I have porcelain stoneware and granite, can I use the stone impregnation on them?
- The question arises as to whether the natural stone is absorbent, i.e. whether it can at least partially absorb a watery liquid. If this is not the case, our stone impregnation will not be able to bond permanently and the shelf life would only be a few weeks. Porcelain stoneware and granite are not absorbent in 98% of cases, but marble can certainly be absorbent.
You can easily test this by putting a few drops of water on the stone. If the color of the surface changes, i.e. it becomes dark due to water absorption, our stone impregnation is suitable.
STONE IMPREGNATION
Nanoprotect stone impregnation is an invisible impregnation for absorbent mineral substrates. Preventive protection against green growth, moss infestation, dirt and frost damage. Less dirt gets into the pores and is easier to clean.
- Water and dirt repellent
- Strong beading effect
- No change in color of the background
- Long-term durability thanks to 2-phase effect
- No solvents
- Suitable for inside and outside
- For all open-pored mineral substrates
- Paving stone
- concrete
- clinker
- Roof tiles
- Sandstone
- Travertine (open-pored)
- terracotta
- 5 liters for approx. 40 m² – 60 m²
- 10 liters for approx. 80 m² – 120 m²
- 10 liters + pressure sprayer for approx. 80 m² – 120 m²
- 1 kg concentrate for approx. 80 m² – 120
STONE CLEANER
Nanoprotect stone cleaner offers professional quality when cleaning all types of stone. The high-performance concentrate reliably removes environmental dirt, greasy dirt or soot deposits. Cleaned surfaces are optimally prepared to be protected with our stone impregnation .
- High-performance concentrate for deep cleaning and care of all washable surfaces
- Reliably removes greasy dirt, environmental dirt or soot deposits
- For clean paths, facades, pebbles, tiles, stone slabs, paving stones or sidewalks
- Easy to use | Biodegradable
- For all washable surfaces
- Paving stone
- concrete
- Natural stone
- clinker
- Wood
- plastic
- textiles
- 1 kg for up to 100 m²
- 2 x 1 kg for up to 200 m²
- 5 kg for up to 500 m²
- 5 kg + pressure sprayer for up to 500 m²
GREEN DEPOSIT REMOVER
Nanoprotect green deposit remover is a highly concentrated disinfectant cleaner for the deep removal of green deposits, verdigris, blackness, black algae, red algae and lichen. The product works completely automatically and without a high-pressure cleaner.
- Liquid concentrate for deep disinfection
- Biodegradable
- Free from chlorine and acids
- Reliable as a facade cleaner, gravestone cleaner, algae killer and for sidewalks, terraces and awnings
- Ideal for roof cleaning, fence cleaning, as a fungus remover and to prevent lichen formation
- For all washable surfaces
- Paving stone
- concrete
- Natural stone
- clinker
- Wood
- plastic
- textiles
- 500 gr for up to 100 m²
- 1 kg for up to 200 m²
- 2 x 1 kg for up to 400 m²
- 1 kg + pressure sprayer for up to 200 m²
